

These centre caps are designed to replace the standard items that originally came with the Chimaera from the factory. They are suitable for Imola alloys only (these are the 5 spoke ones that were standard on the Chimaera as seen in the product images).
Available in a range of badge styles, these wheel centres are 3D printed from ASA (a UV safe plastic) and are attached to the wheels using a retaining ring on the inside of the wheel rather than the original method of a metal spring clip and plastic tabs. On the original items the plastic tabs are quite delicate and it is common for them to get broken off when punched out or pushed back in by a tyre fitter. While both types can be broken if insufficient care is taken, ours do not require any significant force to fit or remove.
The badges themselves are of the gel resin type.
Installation is very easy but instructions are provided with the package. You will need to remove the wheels from the car to fit these wheel centres; this is required anyway in order to be able to remove the old ones.
Note: Since these wheel centres use a different fixing method to most, be sure to instruct your tyre fitter on how to remove and replace them when the time comes for new tyres.